| TAPE 3 |
40-HR. HAZARDOUS WASTE WORKER / 24-HR. EMERGENCY RESPONSE TECHNICIAN |
| VIDEO 1: |
INTRODUCTION TO INDUSTRIAL TOXICOLOGY (15 min.) |
|
What is toxicology? Terms, definitions, and entranceways of toxins into the body are covered in this extensive video. The different types of hazards, hazard identification, and exposure limits are explored, including the different types of TLV. Basic emergency response procedures are outlined as well as how to use Emergency Response Guidebooks to identify and properly respond to chemical hazards.
|
|
|
| VIDEO 2: |
NFPA HAZARDOUS MATERIALS LABELING/I.D. (7 min.) |
|
NFPA labeling and ID program defined and stresses the importance of understanding these signs and placards. Firefighters have used this program for their training.
|
|
|
| VIDEO 3: |
CARBON MONOXIDE POISONING (13 min.) |
|
Defines carbon monoxide poisoning and how to reduce the effects of this health hazard. Almost every industry is exposed, but very little attention is given to its effects. Excellent awareness program.
|
|
|
| VIDEO 4: |
HAZARDOUS ENERGY SOURCE-LOCKOUT/TAGOUT (10 min.) |
|
Mandatory training for both "affected" and "authorized" personnel. Explains what lockout-tagout is and how to control potential accidents from machines and equipment that may be started accidentally through a variety of energy sources.
|
|
|
| VIDEO 5: |
TRENCHING AND SHORING OPERATIONS (12 min.) |
|
Meets training requirements for those persons assigned the job of trenching and shoring. Explains the safety rules, requirements, procedures and emergency procedures.
|
|
|
|